Attention: This is the BOM for the OLD version of the Tube Screamer PCB Mount.

If you purchased the “No Pop” version of the TS, check out the new BOM HERE.

Looking for Parts?

Download PDF

4 Comments

  1. Pags says:

    a schematic would help since the board designations do not match the original schematic (or any other clone out there).

  2. Steve Harmon says:

    This BOM is designed around our custom PCB which you can buy in the shop. At the moment we are not distributing our schematic.

  3. Pags says:

    Understood but it makes troubleshooting the board i got from you pretty difficult. I wound up tracing it out and found the problem. Sounds really good, not sure if the “brown” mod is working properly though still.

  4. Kevin Scott says:

    Yeah I cant get mine to work and it definitely has different values than the stock tube screamer, I also noticed those little tiny holes on the pcb board that aren’t labeled do they make any difference?

Leave a Reply

Your email address will not be published. Required fields are marked *