How to wire a volume pot to the output signal of any DIY synth project

New black plastic synth cases! Awesome for the APC and the CCM!
June 21, 2012
Power supplies with a 9v battery jack!! Center Positive or Center Negative
July 11, 2012
New black plastic synth cases! Awesome for the APC and the CCM!
June 21, 2012
Power supplies with a 9v battery jack!! Center Positive or Center Negative
July 11, 2012

Volume_Potentiometer, Synth_Mod, Volume_help, Volume, Adjust_Level, DIY, Schematics, Synthrotek

Check out the image above.

It shows how to wire a potentiometer that can control the volume on your output signal. A pretty simple mod that could be quite handy! An audio tapered 100k (A100k) Pot would work nicely for volume control. The image below points out the pin numbers on the potentiometer.

synthrotek

Stop by our tech page for more useless… or useful information!!

Also, if you got the time check out some of our youtube videos 

Email us at synthroteksales@gmail.com with any feedback. Thanks!

Leave a Reply

Your email address will not be published. Required fields are marked *